05 Sep

When You Need to Change The Old Water Heater Here’s What To Do

Hot water tanks are probably the most disregarded residential appliances in North American dwellings. It is one of those things often ignored until something fails. We only realize the value of this equipment early on when the shower is too icy to tolerate. That is when you are struck with the realization that you don’t know how to replace a traditional hot water tank.

Ways to Prolong The Lifetime of a Gas Water Heater

Most hot water heaters last about 10 years, after which you can expect to replace it in the near future. Many hardware stores sell hot water tanks and their equal if you really know what to do with them that is. The duration of these tanks can be prolonged either with an insulating jacket or by making certain the calcium deposits in the tank are kept to a minimum. A wise homeowner will follow one or both tips to delay the inescapable replacement.

Even though it makes logical sense that an old water heater need to be changed every so often, you might be curious if it is required to do it before it reaches the end.

A Hot Water Tank Up Grade Cuts Back On Utilities

The main advantage of investing in a new tankless water heater is the savings on your heating bill. A new heater would, in almost every case, work better than any older model. You’ll find a couple of things to look into together with your new purchase if you need to capitalize on your savings which is how much use it will be subjected to.

A larger hot water heater will be needed if you’ve got a big family. All things considered, more inhabitants in the home means added hot water usage.

Different Water Heaters

Hot water tanks fall under two main groups; Natural Gas and Electric. Gas models are more expensive than electric equipment – a standard gas heater would usually cost about $800, as electric units can cost about the same, but as a rule a little less. A lot of people go with the average water heater tank, but tankless water heaters are likewise gaining popularity, so you might want to look at the latter sort of hot water heater.

Regardless of which kind you decide on, gas powered or electric, one can choose the on-demand water heater style. And certainly people who wish to go green you can still look into solar power water heaters, which greatly reduce the unhealthy emissions released by older heating units. Just understand the installation complexity you’ll encounter with a solar heaters, so be prepared to pay those extra installation fees.

Regardless of what type you choose for a new water heater, you ought to take a close look at hiring a heating company for the work. A gas water heater repair or installation requires mechanical know-how and an understanding of local codes for air flow and generally safe functioning. Should you be unfamiliar with this sort of work then do not endanger your budget or your family members security with a shoddy crack at any such set up..

20 Jul

How To Look After Your Own Furnace

When winter approaches it’s time to look at your furnace to make sure it’s ready to go this season. The last thing you want is to come home to a cold house or wake up in the middle of the night with the kids coughing and the floor is freezing.

Hiring professional Kelowna furnace repair technician when you need one is the right thing to do, especially when it comes to something as important as the furnace. An improperly vented furnace can be deadly, so this is something you do not want to take any chances with!

Common Issues with a Furnace

  • Thermostat is broken
  • Issues with ignition light
  • It does not emit heat
  • The blower does not work properly
  • It makes loud noises

Here Are a Few Furnace Trouble Shooting Tips

  1. Gas furnace troubleshooting: If the heating unit will not run; you can check for blown fuses or tripped circuit breakers, follow manufacturer instructions to re-light the pilot light, and check the gas valve to make sure that it is in the proper position.
  2. Electric furnace troubleshooting: There are four things that you can check on electric furnaces. They are the filter, the thermostat, the fan, and the vents. Filters need to be replaced often so that the unit can maintain efficiency. The thermostat needs to be set to heat and the set-point should be set at least five degrees above room temperature. If the fan is not running, you should check for blown fuses or tripped circuit breakers. Air coming from the vents should be warm. If it is cold or if there are rooms in the house that are blowing cooler are, there might be a problem.
  3. Oil furnace troubleshooting: If the unit will not run you can check for blown fuses or tripped circuit breakers. There are tanks that hold the fuel, if the tanks are empty, the unit will not run. You can check the tank’s fuel level. It may also be necessary to press the reset button on the stack control. After trying each of the suggested furnace trouble shooting tips, some people find themselves having to call a professional to make furnace repairs or replace the furnace.

Furnace Repair and Furnace Replacement

If troubleshooting has been performed and the trouble still exists, the unit may need to be repaired. It is not recommended for an untrained homeowner to do the repair yourself. This could lead to costly mistakes and also could have the potential of destroying the unit. Therefore, you are encouraged to contact a professional to complete the repairs.